SKF 22218ek Bearing

Basic Dynamic Radial Load Rating C:78100 N; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:4300 rpm; Basic Static Radial Load Rating Co:88000 N; d:60.000 mm; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Fillet Radius ra:1.50 mm; B:38.10 mm; Accessories:One Shield;

Initial grease fill:1304.1 g; J min.:530.225 mm; h:60.325 mm; R2:41.275 mm; P120°:196 kN; ba:75.406 mm; Max. speed for Taconite seal:460 r/min; A1:180.975 mm; Ca:95.809 mm; Cap bolt:1-8 UNC;

D:540.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:1100 rpm; Sealed Speed Rating n3:0 rpm; Accessories:One Seal; d:440.000 mm; B:46.00 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Basic Static Radial Load Rating Co:405000 N; Basic Dynamic Radial Load Rating C:255000 N;

Fillet Radius ra:2.00 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:20000 N; Oil Speed Rating n2:6300 rpm; B:40.00 mm; Grease Speed Rating n1:5300 rpm; Basic Dynamic Radial Load Rating C:63700 N; d:50.000 mm;

Basic Static Radial Load Rating Co:14000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Accessories:One Seal; Grease Speed Rating n1:8000 rpm; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; Basic Dynamic Radial Load Rating C:20800 N; D:52.0000 mm; d:25.000 mm;

Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:12000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:22900 N; d:17.000 mm; B:17.00 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; Sealed Speed Rating n3:8500 rpm; D:62.0000 mm; Basic Static Radial Load Rating

P150°:66.7 kN; Cap bolt:2 x 1-8 UNC; J1:69.85 mm; H2:53.975 mm; S:4.763 mm; Cap bolt, SAE grade:5; J max.:368.3 mm; ba:53.181 mm; da:103.188 mm; H1:133.35 mm;

Fillet Radius ra:2.00 mm; B:28.00 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:3500 rpm; Basic Dynamic Radial Load Rating C:88000 N; Basic Static Radial Load Rating Co:93000 N; D:150.0000 mm; d:85.000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm;

Basic static load rating C0:56 kN; C:14.288 mm; Calculation factor e:0.48; r3,4 min.:1.5 mm; d:41.275 mm; Limiting speed:9000 r/min; Da min.:65 mm; Dimension series:11000; rb max.:1.5 mm; da max.:50 mm;

Oil Speed Rating Open/Shielded n2:5000 rpm; Accessories:One Shield; Sealed Speed Rating n3:2800 rpm; D:160.0000 mm; Grease Speed Rating n1:4300 rpm; Fillet Radius ra:2.00 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:114000 N; Oil Speed Rating n2:5000 rpm; B:37.00 mm;

G:Tr 360x5; Mass bearing + sleeve:160 kg; ra max.:4 mm; Calculation factor Y1:2; G1:26 mm; D1 ≈:453 mm; Basic static load rating C0:6200 kN; K:9 mm; d2 ≈:377 mm; D:520 mm;

B1:134.95 mm; G:139.624 mm; B4:27 mm; Hydraulic nut:HMVC 28E; Lock washer:W 28; Lock nut:AN 28; B:24.079 mm; d:140 mm; d3 max.:180.315 mm; Sleeve:S 128x4.7/16;

Reference speed:12000 r/min; U:25 mm; Fw:32 mm; Basic static load rating C0:58.5 kN; Basic dynamic load rating C:35.8 kN; Ew:40 mm; Limiting speed:14000 r/min; Mass needle roller and cage assembly:0.049 kg; Fatigue load limit Pu:7.2 kN;

Accessories:One Seal; Basic Static Radial Load Rating Co:440000 N; Fillet Radius ra:3.00 mm; D:480.0000 mm; Basic Dynamic Radial Load Rating C:291000 N; B:56.00 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; d:360.000 mm; Sealed Speed Rating n3:700 rpm; Grease Speed Rating Open/Shielded n1:1100 rpm

Basic static load rating C0:19 kN; d:38.1 mm; J6:118 mm; RG:1/4-28 UNF; B1:56.3 mm; Recommended tightening torque for grub screw:16.5 N·m; A5:23.5 mm; Hexagonal key size for grub screw N:4.763 mm; N:14 mm; Recommended diameter for attachment bolts, inch G:0.5 in;